Rowland Water District
Rowland Water District

Public Information

Where does Rowland Water District’s water come from?

Rowland Water District relies 100% on imported water from Northern California and the Colorado River. It is purchased through the Metropolitan Water District of Southern California and from Three Valleys Municipal Water District. As the cost of imported water continues to rise, the pursuit of local water becomes more critical in saving our customers money over the long term. Rowland Water District is continually pursuing alternative water supply sources through recycled ...Read More

2025-03-06T13:54:25-08:00March 6, 2025|

Why doesn’t Rowland Water District distribute local groundwater?

Currently, Rowland Water District does not have water rights to any treatable local groundwater. Securing additional sources and water rights, investing in recycled water systems for commercial uses, and promoting enhanced conservation measures across the District, reduces the impacts of imported water costs.

2025-03-06T13:53:50-08:00March 6, 2025|

How do I locate my water shut-off valve?

Typically, it will be located in your front yard, on the perimeter of the house, either just outside or inside your garage since that is where the water first enters your house. The shut-off valve is usually located below your hose bib or spigot.

2025-03-14T15:54:35-07:00March 6, 2025|

How do I know if I have a leak?

To do a leak-check, turn off all water fixtures inside and outside your home (or building); check the position of the sweep hand and all the numbers on your water meter. Wait about 15 minutes and then check again. If the position of the sweep hand and the numbers have not changed, you don’t have any leaks. If there is a change, there is a leak somewhere on the property. Check ...Read More

2025-03-06T13:51:31-08:00March 6, 2025|

Where is my water meter and how do I read it?

Water meters are usually located near your front street curb in a concrete box marked “Water.” Remove the lid by using a tool like a screwdriver or pliers. The numbers in the dial boxes show how many cubic feet of water you are using. One cubic foot equals 7.48 gallons of water. If you check your meter throughout the month, you can see how much water you are using. If you ...Read More

2025-03-14T15:52:28-07:00March 6, 2025|

Where can I get more information about my drinking water?

RWD’s annual water quality report (also know as a Consumer Confidence Report) is available here. The water quality report discusses the quality of your water (based on the last calendar year), including any problems or detections of drinking water contaminants, and what is being done to correct the situation.

2025-04-22T22:11:35-07:00March 6, 2025|

As a customer, what portion of my water line is my responsibility?

Rowland Water District is responsible for what is called “the street side” of the water meter, including all water mains in the street and continuing through the community distribution system. The property owner is responsible for maintenance of water lines on the “customer side” of the water meter. This includes the water line from the meter to the house, all interior plumbing and outside irrigation systems.

2025-03-06T13:45:30-08:00March 6, 2025|
Go to Top